Surplus Laboratory Equipment available for sale
Processing
- Color Negative II
- 35 & 35/32 Sprocket Drive 120FPM
- 35 & 35/32 Sprocket Drive 100FPM
- 35 & 16 Filmline with Filmline tendency drive 50FPM
- 35 & 16 Houston Tendency drive 45FPM
- 65 Sprocket drive with additional tanks for b/w seperations
- Color Positive ECP II
- 35mm, 300'/min ECP-II #516 /w Filmline Drive
- Processor is seperated in 4 tank sections, dry box, loading station, and take-up
- Drybox - 128" long, 29" wide, 104" high, 16 racks, 10 rollers top top, 9 rollers on bottom
- Tank sections (includes racks with rollers, drive):
- #1 68" Long, 32" Deep, 101" High
- #2 71" Long, 32" Deep, 101" high
- #3 91" Long, 32" Deep, 101" High
- #4 73" Long, 32" Deep, 101" High
- Loading station, Loading Elevator, Take up station
- 35 Sprocket Drive 200FPM
- Complete, including recirculation, replenishment, and temperature control systems
- 13' Long, 32" Wide, 8' high
- Take off station attached to drybox
- 2 Racks, 8 rollers of top, 7 rollers on bottom
- Tanks - 21" Wide, 95" Tall, Feed Station - 49" Long, 26" Wide, 77" High
- 65 Sprocket Drive 150FPM
- Black and White
- 35 Filmline for High Contrast Film - approx 15FPM
- 65 Seperations for Opticals 3FPM
- 35 & 16 Filmline Spray Machine 20-80FPM
- 35 & 16 High speed Equipment Co. Spray Processor 30-120FPM
- 16 & 8mm Ektachrome
- 16 Reversal
Contact Printing
- 16mm B&H Model C, 3 Light Valves, Fader, Sound head, Reader
- 16/35/32 B&H Model C, 3 Light Valves, Fader, Sound head, Reader
- 35/16 HFC Panel Printer, High speed light valves, reader, interchangable 16&35mm printing heads
- 35mm Loop trees, Peterson, motorized 2 @ 2000' capacity each for continuous printing. Could be seperated into 4 1000' models
- 16mm Loop tree, motorized, 400' to 1200' subjects, pix and track, self loading, through 8 motorized elevators on each size
- 35mm B&H Model D, picture only - handles shrunken film
- 16/35/32 Carter liquid gate printer, includes wet sound head, parts machine - complete
- 16/35/32 Bell and Howell 6322 Panel Printer, Serial #1611 - good for parts
- B&H tape punch system - condition unknown, recommended for parts
- B&H low speed readers - condition unknown, recommended for parts
Optical Printing
- Oxberry 35/35 including Vistavision 35mm 8 perf, electronic drive, video assist
- Comes with three projector and three camera movements
- Lin Dunn 35/65 including color correction system & Oxberry 35/65 Animation stand
- comes with four movements: 35 & 65 camera and 35 & 64 Projector
- Oxberry 35mm 2 and 3 strip evaluator/restoration printer/color analyzer/2 or 3 strip inspection system
- with 3 Oxberry liquid gates, each with interchangable registration pins to optimize registration and to accomodate differential shrinkage by repositioning two of the projector heads NSEW or zoom in/out against third head which is fixed.
- A Computer registers each selected position and repeats it during the printing pass. After the operator selects the optimum registration, the scend is timed using a built in timing system that permits both visual and computerized color and density corrections and polarity changes.
- Developed at a cost of over $850,000 - the entire package is available for $198,500 - including spares.
- Producers Service Co. Acme Model 103. 35/35 to 16/16 Optical Printer
- with Kodak Ektar 103mm f2.8 printing lens, 110/22v
- Film Scanner - High Resolution Plato, custom build for Boss Films
- Accommodates 35mm 4 & 8 perf film, 65mm 5, 8 & 15 perf
- Comes /w Oxberry projector, 35 4 & 8 perf and 65 5 perf movements
- Photometrics film scanner, SGI and PC controlling computers included
Lenses
- Cook 6" 2.8 copying Lens
- Set of CV 45, 61, 117
- Anamorphic to flat unsqueezing lens
- Isco-Gottingen Inscorama lens 4147104
- Printer Lens for intermediate 1.34 to 1.0 reduction GF 141mm
- Newcomer widescreen lens
- ScB - e - 3499
- ScB - e - 2499 (2x)
- Kodak Ektar Printing Lens 1-1.8 88m F3.8
- Kodak Ektar Printing Lens 103mm
- Kodak Printing Lens
- Oxberry Movements 5x35mm
- Producers Service Movements
- 16mm wet gate
- 16mm Oxberry wet gate
- 35 with adjustable aperature height
- 35 with wide screen aperature
- 35mm with 1.58 aperature
- 35/32 - double 16 aperature
- 35 quad 4 x s=8mm aperature
- 16 dual s-8 sperature
- Effects
- Horizontal rotation attachment
- Optical flip attachment
- Photometer - Misener Model 22
- DePue 35-16 reduction step printer, additive ehad, 3 light valves, slow speed B&H reader
- DePue 35-16 reduction step printer, additive head, 3 light valves, slow speed B&H reader, with Carter immersion liquid gate
- RCA TR 62 Sound track reduction printer 35-16
Film Handling
- 35 & 16 Pedestal Splicers, B&H and HFC
- 35/16 Maier Hancock Table Splicers
- 35/16 HFC Table Splicer
- 16mm Maier Hancock Table splicers
- 35/16mm Synchronizers, variety of combinations
- 65/70/35 Synchronizers
- HFC Power Rewinds and food pedals
- Deluxe Power darkroom rewinds
- Can dolly on casters, holds 18 35mm cans
Miscellaneous - Film
The Rest coming soon - including Cleaning, Film coating, Tape to Film, Projectors, Inspection, Film sound, microphones, Audio recorders, misc audio, Video VTRs, Video misc, etc